StorageLoader LTO-1

THIS PRODUCT HAS BEEN DISCONTINUED.

Product Overview

  • Industry's first 1U LTO autoloader
  • Two 4-Slot magazines offering up to 1.6 TB*
  • Performance of up to 115.2 GB/Hr*
  • Turnkey solution with bar code reader, rack kit, remote management and Symantec Backup Exec QuickStart Edition
  • Field Replacable tape drive, power supply, and fans to maximize operating time

The Tandberg StorageLoaderTM LTO-1 provides a strategic and easy entry to the growing open-industry-standard LTO and with the lowest TCO in its capacity range.

The StorageLoader LTO-1 uses an LTO-1 half-height drive from Tandberg Data that features the lowest power consumption of any LTO tape drive, and its unique airflow design minimizes heat dissipation throughout the drive for greater reliability and increased longevity. Tandberg's "smart gripper" technology securely locks the media leader pit for fail-safe tape loading. Total cost of ownership and minimum down time are built into the StorageLoader LTO. The tape drive, power supply and fans are all field replaceable without removing the autoloader from the rack, saving valuable time and money by avoiding costly onsite service visits. The StorageLoader's metal construction provides an extremely robust and rugged solution for optimal, long-term operation.

The convenience and reduced administrative resources of an automated solution and a mid-range feature set at a budget-friendly cost makes the Tandberg StorageLoader LTO a "best-in-class" choice for small to medium businesses moving to automated backup from traditional standalone tape drives. Cables and a SCSI bus terminator to facilitate connectivity to the host network are included. End users need only to add media to begin backup/restore operations within minutes.

Turnkey Solution

The Tandberg StorageLoader LTO-1 ships with a bar code reader, rack kit, remote management and Symantec’s Backup Exec QuickStart software and comes with 3 years warranty and support and 1 year Advanced Replacement Service (component level only).

Media Compatibility

The Tandberg StoragLoader LTO-1 is compatible with industry standard, multi-sourced LTO media. To achieve the best reliability, Tandberg LTO branded and qualified data cartridges are recommended. For more information on media compatibility, click here.

*assumes 2:1 data compression

Specifications
Drive Technology LTO-1 HH
Number of Drives 1
Number of Slots 8
Capacity (native) 0.8 TB
Capacity (compressed) 1.6 TB
Performance (maximum, native) 57.6 GB/h
Performance (maximum, compressed) 115.2 GB/h
Interface Ultra 160 SCSI / LVD
Cartridge Loading 2 Magazines
Temperature (non-operating) -35 to +60
Temperature (operating) 10 - 35
Relative Humidity, operating (non-condensing) 20 - 80 %
Relative Humidity, Non-operating (non-condensing) 10 - 90 %
Form Factor 1U
Height 4.36cm / 1.7 inches
Width 44.66cm / 17.6 inches
Depth 74cm / 29 inches
Weight 14.6kg / 32.4lbs.
Remote Mangement (Web GUI) Yes
Magazine 2
Rackmount-option Included
Barcode Reader Yes
Additional Interface 10base T Ethernet
Field replaceable units Drive, Power Supply, Magazines, Filters & Fans
MTBF 250,000 hours
Power Consumption 100-240VAC, 50-60Hz, 35W (average)
Safety UL-60950 / C-UL C22.2 No. 60950; TÜV EN60950
Certification Marks CE, UL, C-UL, GS/TÜV, VCCI, C-tick
Warranty 3 years warranty (warranty is subject to change in each region)
Models
Partno. Model Description
437171 StorageLoader LTO-1 HH CRU Customer Replaceable Unit/ LTO-1 HH tape drive
7164 StorageLoader LTO-1 StorageLoader LTO-1 HH Autoloader, Bar Code Reader, Rack mount kit, 6ft External SCSI Cable 68 pin VHDCI to 68 pin high density connector, VHDCI Active SCSI Terminator, 2 m cable, European and US/Japanese power cord, 33pcs. Bar code labels, Warranty card, Symantec Backup Exec QS, Quick installation guide
Images

Preview StorageLoader LTO

Name Description Thumbnail Detail Highres
StorageLoader LTO Image Download Thumbnail Image (3.22 KB) Download Detail Image (44.21 KB) Download Highres Image (4.02 MB)

Preview StorageLoader LTO Left

Name Description Thumbnail Detail Highres
StorageLoader LTO Left Image Download Thumbnail Image (2.56 KB) Download Detail Image (38.82 KB) Download Highres Image (551.84 KB)

Preview StorageLoader LTO Right

Name Description Thumbnail Detail Highres
StorageLoader LTO Right Image Download Thumbnail Image (2.87 KB) Download Detail Image (40.74 KB) Download Highres Image (837.5 KB)
Downloads
Filename Description Version Type
820LTO_XP_x86_1.5.zi p Windows 32-bit driver for Tandberg Data half-height LTO drives supporting LTO1, LTO2 and LTO3 named 220LTO, 420LTO and 820LTO. 1.5 Driver
tdkit_installer.exe Old TDKit for use with 1U StorageLoader with ver. D mainboard. 4.2 Utility
st.conf ST.CONF Solaris Driver st.conf is to be used with Solaris (ALL VERSIONS). ALL the Tanderg products are supported - SLR24 -SLR140; 220LTO-420LTO. Placed in "/kernel/drv" and run "boot -- -rv" (without the quotes) to reboot and initialize the drive. Driver
820LTO_W2K3_x64_1.5. zip Windows driver for Tandberg Data half-height LTO family including LTO1, LTO2 and LTO3. 64 bit version. 1.5 Driver
lto_hh_ia64.zip Digitally signed Windows driver for Tandberg Data half-height LTO family including LTO1, LTO2, LTO3 and LTO4. Supporting Itanium-64 series. 1.7 Driver
ltotool.exe Command line tool for fw-flash and test of LTO-drives. 4.92 Utility
tdviewer.zip 1.5 Utility
tdkit-4.7.1-setup.ex e Setup file for TDKit 4.7.1. This version supports the new LTO HH hardware from Tandberg Data. 4.7.1 Utility
ltotool_win32_v4.90[ 1].zip LTO Tool for Windows 98, ME, NT, 2000, XP, 2003 10-15-07 4.90 Utility
lto-hh_revisions.txt Revision document for LTO-HH windows drivers. 1.0 Patch
lto_hh_x64.zip Digitally signed Windows LTO-HH driver for 64bit systems. 1.7 Driver
lto_hh_x86.zip Signed Windows LTO-HH driver for 32-bit systems. Compatible with XP, Vista and Win2003 systems. 1.7 Driver
tdkit4.2_iso.zip ISO version of TDKit. Burn a CD for testing and firmware upgrade without installation. 4.2 Utility
s1ulto_std__d.287.zi p Robotic firmware for StorageLoader-1U with version D mainboard. 2.87 Firmware
how_to_choose_the_co rrect_firmware_sl1u. pdf How to choose correct robotic firmware for 1U StorageLoader. 1 Firmware
tdsafe_v1.80_x64.zip Logo certified (Win2003/2008) x64 64bit driver for StorageLoader 1U and StorageLibrary T40 family. 1.8 Driver
tdsafe_v1.80_x86.zip Logo certified (Win2003/2008) x86 32bit driver for StorageLoader 1U and StorageLibrary T40 family. 1.8 Driver
s1ulto_std_e-0340.zi p Robotic firmware for StorageLoader 1U with revision E mainboard. 3.40 Firmware
5026_0468.zip Firmware upgrade for LTO1-HH tape-drive. (220LTO) 4:68 Firmware
s1ulto_std__g-0343.b in Firmware for StorageLoader LTO 0343 Firmware
Documents
  File Description Type Language
StorageLoader LTO Quick Installation Guide (SCSI) Quick Start Guide
How to Select the Right StorageLoader LTO Firmware. Manual
StorageLoader LTO Quick Installation Guide (SAS) Quick Start Guide
StorageLoader LTO Datasheet (FR) Datasheet
StorageLoader Installation and User Manual for D and E version. Manual
StorageLoader LTO Datasheet Datasheet
Tandberg Data Corporate Brochure Brochure
Compatibility

Software Compatibility List (PDF)

Send Feedback

Send Us Feedback

Questions, comments, suggestions? Use our
feedback form and let us know what you think.

Feedback Form