StorageLibrary T40+
Product Overview
-
Scalable capacity from 19.2TB to 123.2TB* with capacity on Demand (CoD)
-
Pass Thru mechanism will allow up to 5 libraries to be stacked together
-
1-2 Full Height LTO-3 or LTO-4 drives or 1-4 Half Height LTO-3 or LTO-4 drives
-
Performance on Demand (PoD) allows you to add drives or upgrade to the next generation LTO technology
-
SCSI, SAS and native Fibre Channel Connectivity
-
Browser-based remote management interface allows users to remotely monitor, control, configure and diagnose via the Internet
-
The Redundant Power Supply (RPS) detects power fluctuations and fan failures.
-
WORM (write once read many) and Encryption (LTO-4 only) for enhanced data protection and regulatory compliance
-
3 years warranty, 1 year ARS on component level
The Tandberg StorageLibrary T40+ tape library is a professional backup and data protection solution, providing maximum performance and scalable capacities.
The Tandberg StorageLibrary T40+ incorporates the new Pass-Thru feature, allowing you to add additional drives and storage capacity as and when you need it. The Pass-Thru feature will allow up to five T40+ units to be stacked together in a 19” rack configuration.
The T40+ base unit is available with either 24 or 40 slots and the Capacity on Demand (COD) feature allows you to electronically upgrade the number of slots from 24 to 40. The number of slots can be increased from 40 to 77 by adding one additional T40+ in Pass-Thru mode. The base unit can be installed fully with up to 4 half height LTO drives or 2 full height LTO drives and full supports LVD SCSI, Native Fibre Channel and SAS connectivity.
The T40+ is designed to improve efficiency and minimize IT downtime. The Performance on Demand (POD) feature allows you add additional drives or upgrade to the next LTO generation, increasing your library’s performance and capacity. The Web browser-based remote management interface allows you to monitor, control, configure and diagnose problems from anywhere in the world. The T40+ supports SNMP, which will immediately send an e-mail on any error.
The T40+ is supplied with 1x power supply. A secondary power supply can be fitted to provide redundancy for mission critical operations and to avoid power interruption to the library. Both power supplies share the load under normal operating conditions. However, if one of the power supplies fails, the other will assume the full load.
The T40+ tape library provides outstanding value for IT managers that need to perform large, unattended backups, and who require flexibility, reliability and a future proof solution. The StorageLibrary T40+ comes with a 1 year Advanced Replacement Service warranty (component level only) and a 3 year factory warranty.
All these features make the StorageLibrary the midrange library of choice.
Media Compatibility
The Tandberg StorageLibrary T40+ is compatible with industry standard, multi-sourced LTO media. To achieve the best reliability, Tandberg LTO branded and qualified data cartridges are recommended. For more information on media compatibility, click here.
*assumes 2:1 data compression