Search the Knowledge Base:


How to recover if a boot failed after inserting discs
(KB # 8D004B2F)

When you insert discs into the RAID system and the BizNAS is rebooted before the rebuild of the RAID has been completed the BizNAS may fail to boot.

To recover from this situation you need to power down the BizNAS and then remove the newly added disc(s). After this, power on the BizNAS again.

When the machine successfully rebooted you can reinsert the disc(s) again. The rebuilding process will start again but you can use the BizNAS while the rebuild is in process.

Rate this

Send Feedback

Send Us Feedback

Questions, comments, suggestions? Use our
feedback form and let us know what you think.

Feedback Form